Author Index

A

  • Abbas, Ali Modification of Relative Permeability Curves by ultrasonic Applications [Volume 21, Issue 1, 2019, Pages 82-89]
  • Abbas, Ali A Survey of Contractors Permitted to Excavate on Historic Sites in Egypt [Volume 22, Issue 2, 2020, Pages 9-16]
  • Abbas, Aly Gravel Packing Sand Control Technique, Case Study, Belayim field, Gulf of Suez, Egypt [Volume 23, Issue 1, 2021, Pages 82-88]
  • Abbas, Mahmoud Improving Corrosion Resistance of Copper by Forming Super Hydrophobic Layer on Surface [Volume 20, Issue 1, 2018, Pages 6-12]
  • Abbas, Marwa Effect of Nb Addition on the Hot Deformation Behavior and Microstructure of Low Carbon Steel [Volume 20, Issue 1, 2018, Pages 66-72]
  • Abdalla, Ghorashi Comparative Studies on the Grindability of Some Ore Minerals [Volume 24, Issue 1, 2022, Pages 66-71]
  • Abdalla, Gomma Thermal Analysis of The Baking and Start-up Stages For Hall–Heroult Cells at Egyptalum Smelter [Volume 22, Issue 2, 2020, Pages 100-109]
  • Abdalla, Gomma Joint Addition of Zirconium, Titanium and Chromium to Commercial Pure Aluminium [Volume 22, Issue 2, 2020, Pages 58-64]
  • Abdalla, Saied Optimum operating conditions for existing natural gas compression station [Volume 18, Issue 1, 2016, Pages 11-19]
  • Abdelaal, Abd Elazeem A. Washability Study on El-Maghara Coal Mine Reject [Volume 19, Issue 1, 2017, Pages 33-40]
  • Abdelaal, A. M. COD, BOD, Oil Content and Heavy Metals Removal from Wastewater Effluents by Coagulation - Flocculation Process [Volume 19, Issue 1, 2017, Pages 57-62]
  • Abdelaal, A. M. Characterization of Calcium Carbonate Rocks, East El Minya Deposits for Possibility Uses as Industrial Raw Materials [Volume 19, Issue 1, 2017, Pages 81-89]
  • Abdel-Aleem, G. M. Studying Techniques of Gas Emission Reduction [Volume 17, Issue 1, 2015, Pages 80-85]
  • Abdel-Aleim, Galal M. Process simulation and performance improving of a gas plant in operation [Volume 17, Issue 1, 2015, Pages 17-28]
  • Abdel-Aleim, Galal M. Process Simulation and Performance Improving of An Existing Ngl Plant [Volume 17, Issue 1, 2015, Pages 86-94]
  • Abdel Azez, Amr An Optimum Model for Slim Hole Well Kill [Volume 18, Issue 1, 2016, Pages 1-10]
  • Abd El-Azim, M. E. Effect of post weld artificial aging on the local and global mechanical properties of friction stir welds of aluminum alloy 6061-T6 [Volume 19, Issue 1, 2017, Pages 48-56]
  • ABDELAZIZ, GAMAL B. Recent Developments of Solar Stills and Humidification De-humidification Desalination Systems: A Review [Volume 23, Issue 2, 2021, Pages 57-69]
  • Abd El Hady, Nabih A Simulation Case Study for Different Scenarios of Pressure Maintenance to Revive Oil Production From Nukhul Reservoir at East Zeit Oil Field [Volume 17, Issue 1, 2015, Pages 64-74]
  • Abd Elkarim, Ahmed Influence of ZrO2 Particles on the Tribological Properties of AlMg5 Alloy [Volume 23, Issue 1, 2021, Pages 95-103]
  • Abd El-Khalek, Ismail M. Geological Evolution of Sukari Gold Mines Area- Eastern Desert, Egypt [Volume 17, Issue 1, 2015, Pages 29-38]
  • Abdellatif, Mohamed Safe Storage Design For Naturally Occurring Radioactive Material Waste Using Human Intrusion Scenario [Volume 19, Issue 1, 2017, Pages 1-9]
  • Abd Elmomen, Sanaa Influence of Slag Composition and Temperature on Silicon Distribution between Slag and Hot Metal in the Egyptian Blast Furnace No.III [Volume 19, Issue 1, 2017, Pages 26-32]
  • Abd-Elmomen, S. S. Study of the Corrosion Products Formed on Low-Carbon Steel Exposed to Different Environments in Egypt [Volume 17, Issue 1, 2015, Pages 75-79]
  • Abd El Momen, sanaa Effect of Partial Replacement of Iron ore by Mill Scale on the Sinter Process [Volume 23, Issue 1, 2021, Pages 6-11]
  • Abd El Nabbi, M. S. The Optimum Types and Characteristics of Drilling Fluids Used During Drilling in The Egyption Westren Desert [Volume 20, Issue 1, 2018, Pages 89-100]
  • Abd Elrahman, M. A. Effect of post weld artificial aging on the local and global mechanical properties of friction stir welds of aluminum alloy 6061-T6 [Volume 19, Issue 1, 2017, Pages 48-56]
  • Abdel-Salam, Tarek Saad Implementing NI Environment for A Remotely Accessed Photovoltaic Module Characterizer. [Volume 22, Issue 1, 2020, Pages 42-46]
  • Abdel-Salam, Tarek Saad Minimizing Losses on Distribution System by PV and Compensating Capacitors [Volume 22, Issue 1, 2020, Pages 53-60]
  • Abdelwahab, Muhamed Development of new models for predicting crude oil bubble point pressure, oil formation volume factor, and solution gas-oil ratio using genetic algorithm [Volume 22, Issue 2, 2020, Pages 17-39]
  • Abd Hady, Atef Oil Reserves Evaluation and Field Development plan of Hakim Oil Field in Libya [Volume 18, Issue 1, 2016, Pages 39-53]
  • Abouelhassan, Mohamed Analysis of the Petroleum System Elements of the Amana Oil Field, East Abu Gharadig Basin, Western Desert, Egypt [Volume 24, Issue 1, 2022, Pages 28-41]
  • Abouelresh, Mohamed O. Characterization of the Campanian-Maastrichtian Sudr Chalk, Gabal El Bruk, North Sinai, Egypt [Volume 18, Issue 1, 2016, Pages 27-38]
  • Abouzeid, Abdelzaher Mohamed Grindability of Quartz under Compressive and Impact Forces [Volume 22, Issue 2, 2020, Pages 51-57]
  • Abouzeid, Abdelzaher Comparative Studies on the Grindability of Some Ore Minerals [Volume 24, Issue 1, 2022, Pages 66-71]
  • Abu‑Hashish, Mohamed Farouk Reservoir characterization of the Upper Cretaceous Abu Roash "G" Member, using wire line logs and 3D seismic data in West of Nile-X Field, Beni-Suef Basin, Western Desert, Egypt. [Volume 24, Issue 1, 2022, Pages 16-27]
  • Abu‑Hashish, Mohamed Analysis of the Petroleum System Elements of the Amana Oil Field, East Abu Gharadig Basin, Western Desert, Egypt [Volume 24, Issue 1, 2022, Pages 28-41]
  • Abu-Oqaild, A. Effect of Graphene Nano-Sheets Additions on the Microstructure and Wear Behavior of Copper Matrix Nano-Composite [Volume 20, Issue 1, 2018, Pages 124-130]
  • Adel, Abdellattief Heat Treatment of Low Cost Beta Titanium Alloy Produced by Investment Casting [Volume 22, Issue 1, 2020, Pages 35-41]
  • A. Fattah Ahmed, Wael Visco-Elastic Surfactant Improves Sweep Efficiency and Interfacial Tension in Chemical Flooding [Volume 18, Issue 1, 2016, Pages 67-71]
  • Ahmadi Alvar, Mehdi Hybrid computing models to predict oil formation volume factor using multilayer perceptron algorithm [Volume 23, Issue 1, 2021, Pages 17-30]
  • Ahmed, A. Characterization of Calcium Carbonate Rocks, East El Minya Deposits for Possibility Uses as Industrial Raw Materials [Volume 19, Issue 1, 2017, Pages 81-89]
  • Ahmed, Belal Saleh Effect of Partial Replacement of Iron ore by Mill Scale on the Sinter Process [Volume 23, Issue 1, 2021, Pages 6-11]
  • Ahmed, Essam An Investigation of Damages in Low Power Wind Turbine Blades [Volume 20, Issue 1, 2018, Pages 80-88]
  • Ahmed, Essam Effect of Heat Input and Shielding Gas on the Performance of 316 Stainless Steel Gas Tungsten Arc Welding [Volume 22, Issue 1, 2020, Pages 9-15]
  • Ahmed, M. M. Z. An Analytical Model of Heat Generation for Friction Stir Welding Using Bobbin Tool Design [Volume 20, Issue 1, 2018, Pages 1-5]
  • Ahmed, M. M. Z. Production and Characterization of AA7075-Graphite Composite Using Friction Stir Processing [Volume 20, Issue 1, 2018, Pages 101-110]
  • Ahmed, Mahmoud Effect of HYL Process Parameters on the Quality of Iron Ore Reduction [Volume 18, Issue 1, 2016, Pages 54-60]
  • Ahmed, Mohamed Effect of HYL Process Parameters on the Quality of Iron Ore Reduction [Volume 18, Issue 1, 2016, Pages 54-60]
  • Ahmed, Mohamed M. Z. Effect of Number of Friction Stir Processing Passes on Mechanical Properties of SiO2/5083Al Metal Matrix Nano-Composite [Volume 19, Issue 1, 2017, Pages 10-17]
  • Ahmed, Mohamed M.Z. Surface Mechanical Attrition Treatment of Commercially Pure Titanium Using Ball Milling Attritor [Volume 18, Issue 1, 2016, Pages 94-97]
  • Ahmed, Mohamed M. Z. An Investigation of Damages in Low Power Wind Turbine Blades [Volume 20, Issue 1, 2018, Pages 80-88]
  • Ahmed, Mohamed M.Z. Weld pitch effects on friction stir welding of aluminum alloys [Volume 23, Issue 2, 2021, Pages 102-109]
  • Ahmed, Wael A. F. Understanding of Visco-Elastic Surfactant and Acid Stimulation Application [Volume 17, Issue 1, 2015, Pages 54-58]
  • Ahmed Elgharbawy, Abdallah Sayed A review on natural gas previous, current and forecasting prices and demand [Volume 22, Issue 1, 2020, Pages 61-64]
  • Ahmed Elgharbawy, Abdallah Sayed Production of biodiesel from used cooking using linear regression analysis [Volume 22, Issue 2, 2020, Pages 92-99]
  • Ahmed Elgharbawy, Abdallah Transesterification reaction conditions and low-quality feedstock treatment processes for biodiesel production- A review [Volume 23, Issue 1, 2021, Pages 89-94]
  • Alanany, Abdelrahman Studying the Effects of Accumulative Roll Bonding Cycles on the Mechanical Properties of AA1050 Aluminum Alloy [Volume 23, Issue 1, 2021, Pages 54-58]
  • Albarqawy, Mohamed Evaluation of Physical and Geomechanical characteristics at a Steel Rolling Factory at Ataqa industrial zone, Suez, Egypt using Seismic Methods [Volume 23, Issue 1, 2021, Pages 31-43]
  • Albredi, Mosab Effect of Components Concentration of ASP Chemical Flooding Solution on the Phase Behavior (Oil/ASP [Volume 21, Issue 1, 2019, Pages 17-26]
  • Albredi, Mosab Effect of ASP Chemical Flooding Efficiency On Displacement Factor and Water Percentage After Exhaustion of Water Flooding Efficiency in DERO Field [Volume 21, Issue 1, 2019, Pages 72-81]
  • Albredi, Mosab Badr Aldin Using Anionic Surfactants for Increasing the Displacement Factor in Jaribee Formation of Dero Oil Field [Volume 18, Issue 1, 2016, Pages 72-83]
  • AlBredi, Mosab Badr Aldin Improving Oil Displacement Factor by Alkaline Flooding in the DERO Field [Volume 20, Issue 1, 2018, Pages 13-29]
  • AlBredi, Mosab Badr Aldin The Economic Evaluation of the Efficiency of the ASP Chemical Flooding in DERO Field [Volume 20, Issue 1, 2018, Pages 111-123]
  • Ali, Eslam Evaluation of Physical and Geomechanical characteristics at a Steel Rolling Factory at Ataqa industrial zone, Suez, Egypt using Seismic Methods [Volume 23, Issue 1, 2021, Pages 31-43]
  • Ali, Mohamed Thermal Analysis of The Baking and Start-up Stages For Hall–Heroult Cells at Egyptalum Smelter [Volume 22, Issue 2, 2020, Pages 100-109]
  • Ali, Mohamed On the Modified Design of Anode Assembly in Hall-Héroult Cell Using Finite Element Method [Volume 22, Issue 2, 2020, Pages 71-79]
  • Allam, S. Fabrication of Aluminum Matrix Nanocomposites by Hot Compaction [Volume 22, Issue 1, 2020, Pages 16-20]
  • Alrumah, Muhammad Kuwait Oil and Gas Industry Workforce Source and Supply Analysis [Volume 22, Issue 1, 2020, Pages 47-52]
  • Aly, Mahmoud On the Modified Design of Anode Assembly in Hall-Héroult Cell Using Finite Element Method [Volume 22, Issue 2, 2020, Pages 71-79]
  • Aly, Nevin A Survey of Contractors Permitted to Excavate on Historic Sites in Egypt [Volume 22, Issue 2, 2020, Pages 9-16]
  • Ammar, H. R. Production and Characterization of AA7075-Graphite Composite Using Friction Stir Processing [Volume 20, Issue 1, 2018, Pages 101-110]
  • Arafat, Ahmed Ahmed Fuzzy Logic-Based Analytic Hierarchy Process and Principal Component Analyses for Optimal Surface Mining Techniques [Volume 23, Issue 2, 2021, Pages 92-101]
  • Ataya, Sabbah Effect of Dual Phase Steel Processing Conditions on the Microstructure and Mechanical Properties [Volume 18, Issue 1, 2016, Pages 20-26]
  • Ataya, Sabbah Industrial Production of Fine Grained Ferrite in Low-Carbon Steel [Volume 19, Issue 1, 2017, Pages 18-25]
  • Ataya, Sabbah An Investigation of Damages in Low Power Wind Turbine Blades [Volume 20, Issue 1, 2018, Pages 80-88]
  • Ataya, Sabbah Failure analysis of heat exchanger tubes of Ni-200 alloy in a titanium tetrachloride vaporizer [Volume 22, Issue 1, 2020, Pages 21-25]
  • Atlam, Ahmed Aly Time effect of graphene coating in between metallic layers of Copper-Nickel on corrosion behavior for carbon steel in saline water [Volume 23, Issue 2, 2021, Pages 70-80]
  • Attia, Attia Development of new models for predicting crude oil bubble point pressure, oil formation volume factor, and solution gas-oil ratio using genetic algorithm [Volume 22, Issue 2, 2020, Pages 17-39]
  • Awad, Osama M. Production and Characterization of AA7075-Graphite Composite Using Friction Stir Processing [Volume 20, Issue 1, 2018, Pages 101-110]
  • Ayoub, Ahmed Abdelaty Reservoir characterization of the Upper Cretaceous Abu Roash "G" Member, using wire line logs and 3D seismic data in West of Nile-X Field, Beni-Suef Basin, Western Desert, Egypt. [Volume 24, Issue 1, 2022, Pages 16-27]
  • Ayyad, Fatma Simulation of Multi-Stage Flash with Brine Circulating Desalination Plant [Volume 21, Issue 1, 2019, Pages 34-42]
  • Azab, Ahmad Reservoir Characterization Using the Seismic Reflection Data: Bahariya Formation as a Case Study Shushan basin, North Western Desert, Egypt [Volume 24, Issue 1, 2022, Pages 5-15]

B

  • Badr, Osama Failure analysis of heat exchanger tubes of Ni-200 alloy in a titanium tetrachloride vaporizer [Volume 22, Issue 1, 2020, Pages 21-25]
  • Bahaa, Hisham A Simulation Case Study for Different Scenarios of Pressure Maintenance to Revive Oil Production From Nukhul Reservoir at East Zeit Oil Field [Volume 17, Issue 1, 2015, Pages 64-74]
  • Bakkar, Ashraf Failure analysis of heat exchanger tubes of Ni-200 alloy in a titanium tetrachloride vaporizer [Volume 22, Issue 1, 2020, Pages 21-25]
  • Barakat, Moataz Khairy Challenges of the Seismic Image Resolution for Gas Exploration in the East Mediterranean Sea [Volume 23, Issue 2, 2021, Pages 13-23]
  • Barakat, Moataz Khairy Reservoir Characterization Using the Seismic Reflection Data: Bahariya Formation as a Case Study Shushan basin, North Western Desert, Egypt [Volume 24, Issue 1, 2022, Pages 5-15]
  • Barakat, Waheed EFFECT OF Al2O3 COATED Cu NANOPARTICLES ON PROPERTIES OF Al / Al2O3 COMPOSITES [Volume 22, Issue 1, 2020, Pages 1-8]
  • Behiry, Ahmed Ebrahim Abu El-Maaty 3D Finite Element Modeling of Dowel Jointed Plain Concrete Pavement [Volume 17, Issue 1, 2015, Pages 59-65]
  • Bhran, Ahmed A. Process simulation and performance improving of a gas plant in operation [Volume 17, Issue 1, 2015, Pages 17-28]
  • Bhran, Ahmed A. Process Simulation and Performance Improving of An Existing Ngl Plant [Volume 17, Issue 1, 2015, Pages 86-94]
  • Bizanti, mohamed Sadik Kuwait Oil and Gas Industry Workforce Source and Supply Analysis [Volume 22, Issue 1, 2020, Pages 47-52]

C

  • Campos, Anthony Method Adaptation for Antiscaling Products Efficiency Measurement [Volume 23, Issue 2, 2021, Pages 24-34]
  • Castillo Campos, Luis Method Adaptation for Antiscaling Products Efficiency Measurement [Volume 23, Issue 2, 2021, Pages 24-34]
  • Cotrinton, Francisco Method Adaptation for Antiscaling Products Efficiency Measurement [Volume 23, Issue 2, 2021, Pages 24-34]

D

  • Dahab, M Recent Developments of Solar Stills and Humidification De-humidification Desalination Systems: A Review [Volume 23, Issue 2, 2021, Pages 57-69]

E

  • Elayouty, Sayed Oil Reserves Evaluation and Field Development plan of Hakim Oil Field in Libya [Volume 18, Issue 1, 2016, Pages 39-53]
  • Elbadry, Elsayed Thermal Analysis of The Baking and Start-up Stages For Hall–Heroult Cells at Egyptalum Smelter [Volume 22, Issue 2, 2020, Pages 100-109]
  • Elbassouny, Hesham Thermal maturity and hydrocarbon generation modelling for the Lower Rudeis source rock and petroleum system analysis in Garra area, Gulf of Suez Rift, Egypt [Volume 23, Issue 1, 2021, Pages 65-81]
  • El-Batanony, Ismail Electrical and Thermal Conductivity Performance of epoxy/SiC composite prepared by a modified apparatus [Volume 23, Issue 2, 2021, Pages 42-48]
  • Elfarran, M. Investigating the Cooling Performance of Vehicle Engines Using Radiator with Nano-fluid as A Coolant [Volume 23, Issue 2, 2021, Pages 110-121]
  • El-Gendy, Nader Challenges of the Seismic Image Resolution for Gas Exploration in the East Mediterranean Sea [Volume 23, Issue 2, 2021, Pages 13-23]
  • Elgibaly, A. A. The Optimum Types and Characteristics of Drilling Fluids Used During Drilling in The Egyption Westren Desert [Volume 20, Issue 1, 2018, Pages 89-100]
  • Elgibaly, Ahmed An Optimum Model for Slim Hole Well Kill [Volume 18, Issue 1, 2016, Pages 1-10]
  • Elgibaly, Ahmed Visco-Elastic Surfactant Improves Sweep Efficiency and Interfacial Tension in Chemical Flooding [Volume 18, Issue 1, 2016, Pages 67-71]
  • Elgibaly, Ahmed A. An Optimum Limited Entry for Multiple Zone Stimulation by Hydraulic Fracturing [Volume 18, Issue 1, 2016, Pages 84-93]
  • Elgibaly, Ahmed A. Understanding of Visco-Elastic Surfactant and Acid Stimulation Application [Volume 17, Issue 1, 2015, Pages 54-58]
  • Elgibaly, Ahmed Well control during drilling and workover operations [Volume 21, Issue 1, 2019, Pages 104-120]
  • El Gibaly, Ahmed Annular Pressure Losses Prediction Using Power-Law Model with Polymer Water-Base Mud [Volume 20, Issue 1, 2018, Pages 58-65]
  • Elhefnawy, Waleed Simulation and Optimization Analysis of Natural Gas Liquid (NLG) Recovery Process from Natural Gas [Volume 19, Issue 1, 2017, Pages 90-102]
  • Elhifnawy, H. E. Evaluation of INS Performance in Mine Mapping [Volume 18, Issue 1, 2016, Pages 61-66]
  • El-Hussany, Basma Safe Storage Design For Naturally Occurring Radioactive Material Waste Using Human Intrusion Scenario [Volume 19, Issue 1, 2017, Pages 1-9]
  • Elkady, Omayma A. Effect of Graphene Nano-Sheets Additions on the Microstructure and Wear Behavior of Copper Matrix Nano-Composite [Volume 20, Issue 1, 2018, Pages 124-130]
  • Elkady, Omyma EFFECT OF Al2O3 COATED Cu NANOPARTICLES ON PROPERTIES OF Al / Al2O3 COMPOSITES [Volume 22, Issue 1, 2020, Pages 1-8]
  • Elkady, Omyma Synthesis and Evaluation of Strengthened Copper with 3 wt. % TiC and/ or Al2O3 Prepared By SPS Technique [Volume 23, Issue 1, 2021, Pages 44-53]
  • El Kawas, Ahmed Industrial Production of Fine Grained Ferrite in Low-Carbon Steel [Volume 19, Issue 1, 2017, Pages 18-25]
  • El-Kawas, Ahmed Effect of Nb Addition on the Hot Deformation Behavior and Microstructure of Low Carbon Steel [Volume 20, Issue 1, 2018, Pages 66-72]
  • El-Koussy, M. R. Effect of post weld artificial aging on the local and global mechanical properties of friction stir welds of aluminum alloy 6061-T6 [Volume 19, Issue 1, 2017, Pages 48-56]
  • Elmaadawy, Khaled Thermal maturity and hydrocarbon generation modelling for the Lower Rudeis source rock and petroleum system analysis in Garra area, Gulf of Suez Rift, Egypt [Volume 23, Issue 1, 2021, Pages 65-81]
  • Elmaadawy, Khaled Oil characteristics and source rock potential of Abu Rudeis-Abu Zenima area, Central province, Gulf of Suez, Egypt [Volume 23, Issue 2, 2021, Pages 1-12]
  • Elmaghraby, Maher A. Effect of Graphene Nano-Sheets Additions on the Microstructure and Wear Behavior of Copper Matrix Nano-Composite [Volume 20, Issue 1, 2018, Pages 124-130]
  • El-Maghraby, Rehab Simulation of Multi-Stage Flash with Brine Circulating Desalination Plant [Volume 21, Issue 1, 2019, Pages 34-42]
  • El-Maghraby, Rehab A Study on Catalyst Entrainment from the Ethylene Oxychlorination Fluidized Bed Reactor [Volume 23, Issue 1, 2021, Pages 12-16]
  • El-Mahdy, Asmaa Ashraf Minimizing Losses on Distribution System by PV and Compensating Capacitors [Volume 22, Issue 1, 2020, Pages 53-60]
  • El-Nagdy, Khaled Ali Fuzzy Logic-Based Analytic Hierarchy Process and Principal Component Analyses for Optimal Surface Mining Techniques [Volume 23, Issue 2, 2021, Pages 92-101]
  • EL-Nikhaily, A. Synthesis and Evaluation of Strengthened Copper with 3 wt. % TiC and/ or Al2O3 Prepared By SPS Technique [Volume 23, Issue 1, 2021, Pages 44-53]
  • EL-Nikhaily, ahmed Effect of Heat Input and Shielding Gas on the Performance of 316 Stainless Steel Gas Tungsten Arc Welding [Volume 22, Issue 1, 2020, Pages 9-15]
  • EL-Nikhaily, ahmed Studying the Effects of Accumulative Roll Bonding Cycles on the Mechanical Properties of AA1050 Aluminum Alloy [Volume 23, Issue 1, 2021, Pages 54-58]
  • EL-Nikhaily, Ahmed An Analytical Model of Heat Generation for Friction Stir Welding Using Bobbin Tool Design [Volume 20, Issue 1, 2018, Pages 1-5]
  • EL-Nikhaily, Ahmed E. Effect of Number of Friction Stir Processing Passes on Mechanical Properties of SiO2/5083Al Metal Matrix Nano-Composite [Volume 19, Issue 1, 2017, Pages 10-17]
  • EL-Nikhaily, Ahmed EFFECT OF Al2O3 COATED Cu NANOPARTICLES ON PROPERTIES OF Al / Al2O3 COMPOSITES [Volume 22, Issue 1, 2020, Pages 1-8]
  • El-Nikhely, Adly Challenges of the Seismic Image Resolution for Gas Exploration in the East Mediterranean Sea [Volume 23, Issue 2, 2021, Pages 13-23]
  • Elnoby, Mohsen Adjusting Relative Permeability Measurements to History Match Water Production in Dynamic Simulation Models [Volume 24, Issue 1, 2022, Pages 72-80]
  • Elrakaiby, Randa Selective Leaching for Uranium and Gold from their Bearing Sedimentary Lower Carbonaceous Sandstone Rocks, Southwestern Sinai, Egypt [Volume 21, Issue 1, 2019, Pages 90-96]
  • El-Said, Emad Recent Developments of Solar Stills and Humidification De-humidification Desalination Systems: A Review [Volume 23, Issue 2, 2021, Pages 57-69]
  • Elsayed, Ayman Synthesis and Evaluation of Strengthened Copper with 3 wt. % TiC and/ or Al2O3 Prepared By SPS Technique [Volume 23, Issue 1, 2021, Pages 44-53]
  • Elsayed, Nadia A. Simulation and Optimization Analysis of Natural Gas Liquid (NLG) Recovery Process from Natural Gas [Volume 19, Issue 1, 2017, Pages 90-102]
  • El Sayed, N. A. A Statistical Model for Hole Cleaning and Cuttings Transport Efficiency During Drilling of Wells [Volume 20, Issue 1, 2018, Pages 30-40]
  • ELSayed, Eyd M. Effect of Number of Friction Stir Processing Passes on Mechanical Properties of SiO2/5083Al Metal Matrix Nano-Composite [Volume 19, Issue 1, 2017, Pages 10-17]
  • El Sheikh, Taher Improving the Energy Efficiency for Propane Recovery from Natural Gas using Pinch Technology: A Case Study [Volume 22, Issue 2, 2020, Pages 110-118]
  • Elshenawy, Eman Studying the Effects of Accumulative Roll Bonding Cycles on the Mechanical Properties of AA1050 Aluminum Alloy [Volume 23, Issue 1, 2021, Pages 54-58]
  • Elsiragy, Mohamed Utilization of stone column for improving seismic response of foundation on soft clay- Numerical study [Volume 23, Issue 1, 2021, Pages 59-64]
  • EL Temtamy, Seham A. Improving the Energy Efficiency for Propane Recovery from Natural Gas using Pinch Technology: A Case Study [Volume 22, Issue 2, 2020, Pages 110-118]
  • Elwasly, Hamdy Fabrication of Al Alloy-Based Metal Matrix Composites and Use the Interpolation Approach for Mechanical Properties Estimation [Volume 22, Issue 2, 2020, Pages 40-50]
  • Elzeky, Mohamed Effect of HYL Process Parameters on the Quality of Iron Ore Reduction [Volume 18, Issue 1, 2016, Pages 54-60]
  • Emam, Eman Industrial Application of Plant Crude Oil through Comparison of Heat Exchanger Network Synthesis Techniques [Volume 23, Issue 2, 2021, Pages 49-56]
  • Essa, Ahmed Synthesis and Evaluation of Strengthened Copper with 3 wt. % TiC and/ or Al2O3 Prepared By SPS Technique [Volume 23, Issue 1, 2021, Pages 44-53]
  • Essa, Ahmed Studying the Effects of Accumulative Roll Bonding Cycles on the Mechanical Properties of AA1050 Aluminum Alloy [Volume 23, Issue 1, 2021, Pages 54-58]
  • Essa, Ahmed R.S Weld pitch effects on friction stir welding of aluminum alloys [Volume 23, Issue 2, 2021, Pages 102-109]

F

  • Farag, Ahmed Investigating the Cooling Performance of Vehicle Engines Using Radiator with Nano-fluid as A Coolant [Volume 23, Issue 2, 2021, Pages 110-121]
  • Farahat, M. S. The Optimum Types and Characteristics of Drilling Fluids Used During Drilling in The Egyption Westren Desert [Volume 20, Issue 1, 2018, Pages 89-100]
  • Farahat, Mohamed An Optimum Model for Slim Hole Well Kill [Volume 18, Issue 1, 2016, Pages 1-10]
  • Farahat, Mohamed Annular Pressure Losses Prediction Using Power-Law Model with Polymer Water-Base Mud [Volume 20, Issue 1, 2018, Pages 58-65]
  • Farahat, Mohamed Drill bits optimization using offset wells analysis and ROP modelling [Volume 23, Issue 1, 2021, Pages 1-5]
  • Farahat, M. S. A Statistical Model for Hole Cleaning and Cuttings Transport Efficiency During Drilling of Wells [Volume 20, Issue 1, 2018, Pages 30-40]
  • Farhat, Mohamed Visco-Elastic Surfactant Improves Sweep Efficiency and Interfacial Tension in Chemical Flooding [Volume 18, Issue 1, 2016, Pages 67-71]
  • Farhat, Mohamed An Optimum Limited Entry for Multiple Zone Stimulation by Hydraulic Fracturing [Volume 18, Issue 1, 2016, Pages 84-93]
  • Farhat, Mohamed S. Understanding of Visco-Elastic Surfactant and Acid Stimulation Application [Volume 17, Issue 1, 2015, Pages 54-58]
  • Faroun, H. A. Studying Techniques of Gas Emission Reduction [Volume 17, Issue 1, 2015, Pages 80-85]
  • Fetouh, Tarek Improving the Energy Efficiency for Propane Recovery from Natural Gas using Pinch Technology: A Case Study [Volume 22, Issue 2, 2020, Pages 110-118]
  • Figueroa Velásquez, Gabriela Yasodhara Crude anti-accretion additive from petroleum coke distillate [Volume 23, Issue 2, 2021, Pages 35-41]
  • Fouad, Hisham Selective Leaching for Uranium and Gold from their Bearing Sedimentary Lower Carbonaceous Sandstone Rocks, Southwestern Sinai, Egypt [Volume 21, Issue 1, 2019, Pages 90-96]
  • Fouad, Ramy Ahmed Effect of Heat Input and Shielding Gas on the Performance of 316 Stainless Steel Gas Tungsten Arc Welding [Volume 22, Issue 1, 2020, Pages 9-15]

G

  • Gad, F. K. Studying Techniques of Gas Emission Reduction [Volume 17, Issue 1, 2015, Pages 80-85]
  • Gad, Fatma Optimum operating conditions for existing natural gas compression station [Volume 18, Issue 1, 2016, Pages 11-19]
  • Gad, Fatma Safe Storage Design For Naturally Occurring Radioactive Material Waste Using Human Intrusion Scenario [Volume 19, Issue 1, 2017, Pages 1-9]
  • Gad, Fatma K. Simulation and Optimization Analysis of Natural Gas Liquid (NLG) Recovery Process from Natural Gas [Volume 19, Issue 1, 2017, Pages 90-102]
  • Gad, Fatma K. Hydrogen Distribution Network of Medor Refinery Plant by Using Two Different Optimization Techniques [Volume 17, Issue 1, 2015, Pages 66-72]
  • Gad, Fatma Mixed Refrigeration Process for Improving NGL Recovery of El-Wastani Gas Plant [Volume 21, Issue 1, 2019, Pages 56-71]
  • Gad, Fatma A superstructure model for indirect inter-plant water integration for selecting the optimum single-pass and partitioning regenerators [Volume 22, Issue 2, 2020, Pages 1-8]
  • Gad, Mohamed S. Improving the Energy Efficiency for Propane Recovery from Natural Gas using Pinch Technology: A Case Study [Volume 22, Issue 2, 2020, Pages 110-118]
  • Gad Elrab, Hany Gamal Joint Addition of Zirconium, Titanium and Chromium to Commercial Pure Aluminium [Volume 22, Issue 2, 2020, Pages 58-64]
  • Gawish, Ahmed A. A Study on Gas Compressibility Factor for Gas-Condensate Systems [Volume 20, Issue 1, 2018, Pages 41-57]
  • Gawish, Ahmed Reservoir Pressure Determination Using “After Hydraulic Fracturing Closure Analysis” technique [Volume 21, Issue 1, 2019, Pages 43-55]
  • Gawish, Ahmed Ahmed Modern Decline Curve Analysis of Unconventional Reservoirs: A Comparative Study Using Actual Data [Volume 24, Issue 1, 2022, Pages 51-65]
  • Ghorbani, Hamzeh Hybrid computing models to predict oil formation volume factor using multilayer perceptron algorithm [Volume 23, Issue 1, 2021, Pages 17-30]
  • Gomaa, Ehab Elsayed Fuzzy Logic-Based Analytic Hierarchy Process and Principal Component Analyses for Optimal Surface Mining Techniques [Volume 23, Issue 2, 2021, Pages 92-101]

H

  • Habba, Mohamed An Analytical Model of Heat Generation for Friction Stir Welding Using Bobbin Tool Design [Volume 20, Issue 1, 2018, Pages 1-5]
  • Hady, Atef A. Process Simulation and Performance Improving of An Existing Ngl Plant [Volume 17, Issue 1, 2015, Pages 86-94]
  • Hamada, Ghareb Prediction of Porosity and Water Saturation Using Neural Networks in Shaly Sand Reservoirs, Western Deseret, Egypt [Volume 22, Issue 2, 2020, Pages 80-91]
  • Hamama, Mostafa Evaluation of INS Performance in Mine Mapping [Volume 18, Issue 1, 2016, Pages 61-66]
  • Hamed, Ahmed Safe Storage Design For Naturally Occurring Radioactive Material Waste Using Human Intrusion Scenario [Volume 19, Issue 1, 2017, Pages 1-9]
  • Hamed, Ayman Gravel Packing Sand Control Technique, Case Study, Belayim field, Gulf of Suez, Egypt [Volume 23, Issue 1, 2021, Pages 82-88]
  • Hamed, Ibtehal Improving Corrosion Resistance of Copper by Forming Super Hydrophobic Layer on Surface [Volume 20, Issue 1, 2018, Pages 6-12]
  • Hamid, Ayman A Survey of Contractors Permitted to Excavate on Historic Sites in Egypt [Volume 22, Issue 2, 2020, Pages 9-16]
  • Hamid, Fadel Synthesis and Evaluation of Strengthened Copper with 3 wt. % TiC and/ or Al2O3 Prepared By SPS Technique [Volume 23, Issue 1, 2021, Pages 44-53]
  • Hannora, Ahmed E. Surface Mechanical Attrition Treatment of Commercially Pure Titanium Using Ball Milling Attritor [Volume 18, Issue 1, 2016, Pages 94-97]
  • Hany, Sarah M. Sequence Stratigraphic Analysis of The Carbon-Siliciclastic Miocene Sediments, North Eastern Desert, Egypt [Volume 17, Issue 1, 2015, Pages 73-63]
  • Haroon, Peter Emad Current Theories and Concepts for the Determination of Roof Loading over the Hydraulic Supports in Longwall Faces [Volume 24, Issue 1, 2022, Pages 42-50]
  • Hashim, Mohamed Selective Leaching for Uranium and Gold from their Bearing Sedimentary Lower Carbonaceous Sandstone Rocks, Southwestern Sinai, Egypt [Volume 21, Issue 1, 2019, Pages 90-96]
  • Hashish, Ayman Optimum operating conditions for existing natural gas compression station [Volume 18, Issue 1, 2016, Pages 11-19]
  • Hassan, Hatem F. Characterization of the Campanian-Maastrichtian Sudr Chalk, Gabal El Bruk, North Sinai, Egypt [Volume 18, Issue 1, 2016, Pages 27-38]
  • Hassan, Hatem F. Sequence Stratigraphic Analysis of The Carbon-Siliciclastic Miocene Sediments, North Eastern Desert, Egypt [Volume 17, Issue 1, 2015, Pages 73-63]
  • Hassan, Mohamed A Simulation Case Study for Different Scenarios of Pressure Maintenance to Revive Oil Production From Nukhul Reservoir at East Zeit Oil Field [Volume 17, Issue 1, 2015, Pages 64-74]
  • Hassanean, Mohamed Simulation of Multi-Stage Flash with Brine Circulating Desalination Plant [Volume 21, Issue 1, 2019, Pages 34-42]
  • Hawish, Ahmed A. Reservoir Pressure Determination Using “After Hydraulic Fracturing Closure Analysis” technique [Volume 17, Issue 1, 2015, Pages 1-16]
  • Hazbeh, Omid Hybrid computing models to predict oil formation volume factor using multilayer perceptron algorithm [Volume 23, Issue 1, 2021, Pages 17-30]
  • Hegazi, Ahmed GEOTECHNICAL EVALUATION OF SOIL AT EL-ALAMEIN NEW CITY, NORTHERN COAST, EGYPT [Volume 22, Issue 1, 2020, Pages 26-34]
  • Hellish, Hany Challenges of the Seismic Image Resolution for Gas Exploration in the East Mediterranean Sea [Volume 23, Issue 2, 2021, Pages 13-23]
  • Heshmat, Mahmoud Current Theories and Concepts for the Determination of Roof Loading over the Hydraulic Supports in Longwall Faces [Volume 24, Issue 1, 2022, Pages 42-50]

I

  • Ibrahim, Ahmed Riad Current Theories and Concepts for the Determination of Roof Loading over the Hydraulic Supports in Longwall Faces [Volume 24, Issue 1, 2022, Pages 42-50]
  • Ibrahim, Amr Comparative Studies on the Grindability of Some Ore Minerals [Volume 24, Issue 1, 2022, Pages 66-71]
  • Ibrahim, Ashour Mixed Refrigeration Process for Improving NGL Recovery of El-Wastani Gas Plant [Volume 21, Issue 1, 2019, Pages 56-71]
  • Ibrahim, O. H. Effect of post weld artificial aging on the local and global mechanical properties of friction stir welds of aluminum alloy 6061-T6 [Volume 19, Issue 1, 2017, Pages 48-56]
  • Ibrahim, Samir Effect of Dual Phase Steel Processing Conditions on the Microstructure and Mechanical Properties [Volume 18, Issue 1, 2016, Pages 20-26]
  • Ibrahim, Samir Effect of Nb Addition on the Hot Deformation Behavior and Microstructure of Low Carbon Steel [Volume 20, Issue 1, 2018, Pages 66-72]
  • Ibrahim, Samir Processing and Evaluation of Ferritic-Bainitic Multi-phase Steel [Volume 19, Issue 1, 2017, Pages 71-80]
  • Imbaby, Said Saad Current Theories and Concepts for the Determination of Roof Loading over the Hydraulic Supports in Longwall Faces [Volume 24, Issue 1, 2022, Pages 42-50]
  • Inrahim, Samir Industrial Production of Fine Grained Ferrite in Low-Carbon Steel [Volume 19, Issue 1, 2017, Pages 18-25]

K

  • Kamel, A. M. Evaluation of INS Performance in Mine Mapping [Volume 18, Issue 1, 2016, Pages 61-66]
  • Kandil, Amr Influence of ZrO2 Particles on the Tribological Properties of AlMg5 Alloy [Volume 23, Issue 1, 2021, Pages 95-103]
  • Kandil, Amr Time effect of graphene coating in between metallic layers of Copper-Nickel on corrosion behavior for carbon steel in saline water [Volume 23, Issue 2, 2021, Pages 70-80]
  • Karam, Mohamed GEOTECHNICAL EVALUATION OF SOIL AT EL-ALAMEIN NEW CITY, NORTHERN COAST, EGYPT [Volume 22, Issue 1, 2020, Pages 26-34]
  • Kassab, Mohammed Gravel Packing Sand Control Technique, Case Study, Belayim field, Gulf of Suez, Egypt [Volume 23, Issue 1, 2021, Pages 82-88]
  • Kaytbay, Saleh Fabrication of Aluminum Matrix Nanocomposites by Hot Compaction [Volume 22, Issue 1, 2020, Pages 16-20]
  • Khalefa, Moatasem Artificial Neural Network Prediction of Silicon and Nickel recovery in Al-Si-Ni alloy Manufactured by Stir Casting [Volume 21, Issue 1, 2019, Pages 1-8]
  • Khalefa, Moatasem Use of artificial neural network for prediction of mechanical properties of Al-Si alloys synthesized by stir casting [Volume 21, Issue 1, 2019, Pages 97-103]
  • Khalefa, Moatasem Fabrication of Al Alloy-Based Metal Matrix Composites and Use the Interpolation Approach for Mechanical Properties Estimation [Volume 22, Issue 2, 2020, Pages 40-50]
  • Khalifa, Mohamed Effect of Partial Replacement of Iron ore by Mill Scale on the Sinter Process [Volume 23, Issue 1, 2021, Pages 6-11]
  • Khalil, Sara M. Geological Evolution of Sukari Gold Mines Area- Eastern Desert, Egypt [Volume 17, Issue 1, 2015, Pages 29-38]
  • Khattab, Hamed M. Reservoir Pressure Determination Using “After Hydraulic Fracturing Closure Analysis” technique [Volume 17, Issue 1, 2015, Pages 1-16]
  • Khattab, Hamed Reservoir Pressure Determination Using “After Hydraulic Fracturing Closure Analysis” technique [Volume 21, Issue 1, 2019, Pages 43-55]
  • Khattab, Hamid M. A Study on Gas Compressibility Factor for Gas-Condensate Systems [Volume 20, Issue 1, 2018, Pages 41-57]
  • Khattab, Hamid Mohamed Modern Decline Curve Analysis of Unconventional Reservoirs: A Comparative Study Using Actual Data [Volume 24, Issue 1, 2022, Pages 51-65]
  • Kheir, George Annular Pressure Losses Prediction Using Power-Law Model with Polymer Water-Base Mud [Volume 20, Issue 1, 2018, Pages 58-65]
  • Khezerloo-ye Aghdam, Saeed Hybrid computing models to predict oil formation volume factor using multilayer perceptron algorithm [Volume 23, Issue 1, 2021, Pages 17-30]
  • Kim, Jin K. Hydrogen Distribution Network of Medor Refinery Plant by Using Two Different Optimization Techniques [Volume 17, Issue 1, 2015, Pages 66-72]

L

  • Lotfy, Aziza Selective Leaching for Uranium and Gold from their Bearing Sedimentary Lower Carbonaceous Sandstone Rocks, Southwestern Sinai, Egypt [Volume 21, Issue 1, 2019, Pages 90-96]

M

  • Maghraby, Rehab Improving Corrosion Resistance of Copper by Forming Super Hydrophobic Layer on Surface [Volume 20, Issue 1, 2018, Pages 6-12]
  • Mahmoud, Atef Novel Applications of Dry Vinasse to Improve Properties of Concrete [Volume 22, Issue 2, 2020, Pages 65-70]
  • Mahmoud, Eslam H. Reservoir Pressure Determination Using “After Hydraulic Fracturing Closure Analysis” technique [Volume 17, Issue 1, 2015, Pages 1-16]
  • Mahmoud, Eslam Reservoir Pressure Determination Using “After Hydraulic Fracturing Closure Analysis” technique [Volume 21, Issue 1, 2019, Pages 43-55]
  • Mahmoud, Ibrahem Implementing NI Environment for A Remotely Accessed Photovoltaic Module Characterizer. [Volume 22, Issue 1, 2020, Pages 42-46]
  • Megahid, Mennatullah Gamal Minimizing Losses on Distribution System by PV and Compensating Capacitors [Volume 22, Issue 1, 2020, Pages 53-60]
  • Menisy, Mohamed Fabrication of Aluminum Matrix Nanocomposites by Hot Compaction [Volume 22, Issue 1, 2020, Pages 16-20]
  • Mesbah, Maher A. Geological Evolution of Sukari Gold Mines Area- Eastern Desert, Egypt [Volume 17, Issue 1, 2015, Pages 29-38]
  • Mesbah, Maher Abdel-Fattah Evaluation of Physical and Geomechanical characteristics at a Steel Rolling Factory at Ataqa industrial zone, Suez, Egypt using Seismic Methods [Volume 23, Issue 1, 2021, Pages 31-43]
  • Michael, Nabil Reservoir Characterization Using the Seismic Reflection Data: Bahariya Formation as a Case Study Shushan basin, North Western Desert, Egypt [Volume 24, Issue 1, 2022, Pages 5-15]
  • Moawad, Taha Moawad M. A Simulation Case Study for Different Scenarios of Pressure Maintenance to Revive Oil Production From Nukhul Reservoir at East Zeit Oil Field [Volume 17, Issue 1, 2015, Pages 64-74]
  • Moghadasi, Jamshid Hybrid computing models to predict oil formation volume factor using multilayer perceptron algorithm [Volume 23, Issue 1, 2021, Pages 17-30]
  • Mohamadian, Nima Hybrid computing models to predict oil formation volume factor using multilayer perceptron algorithm [Volume 23, Issue 1, 2021, Pages 17-30]
  • Mohamed, Abdelkarim Y.A Weld pitch effects on friction stir welding of aluminum alloys [Volume 23, Issue 2, 2021, Pages 102-109]
  • Mohamed, Adel Improving Corrosion Resistance of Copper by Forming Super Hydrophobic Layer on Surface [Volume 20, Issue 1, 2018, Pages 6-12]
  • Mohamed, Hussien Improving the Energy Efficiency for Propane Recovery from Natural Gas using Pinch Technology: A Case Study [Volume 22, Issue 2, 2020, Pages 110-118]
  • Mohamed, Nasser Safe Storage Design For Naturally Occurring Radioactive Material Waste Using Human Intrusion Scenario [Volume 19, Issue 1, 2017, Pages 1-9]
  • Mohrez, Waleed Influence of ZrO2 Particles on the Tribological Properties of AlMg5 Alloy [Volume 23, Issue 1, 2021, Pages 95-103]
  • Mouhareb, Raafat S. Contributions to the Petrology of Upper Cretaceous of El Duwi Formation at Gabal El Galala El Qibliya area, North Eastern Desert, Egypt [Volume 17, Issue 1, 2015, Pages 39-53]
  • Mouhareb, R. S. Petrographical and mineralogical studies of Hammamat sediments and Gattarian granite along Wadi Belih, north Eastern Desert, Egypt. [Volume 19, Issue 1, 2017, Pages 63-70]
  • Mustafa, Younis Suliman Trace Elements Mineralization – Gala-En Nahal Area Gadarif State –Sudan [Volume 20, Issue 1, 2018, Pages 73-79]
  • Mustafa, Younis Suliman Geochemical and Statistical Evaluation of Gold Mineralization of AbuSari Area–Northern Sudan [Volume 19, Issue 1, 2017, Pages 41-47]
  • Mustafa, Younis Comparative Studies on the Grindability of Some Ore Minerals [Volume 24, Issue 1, 2022, Pages 66-71]

N

  • Nabil, Tamer Investigating the Cooling Performance of Vehicle Engines Using Radiator with Nano-fluid as A Coolant [Volume 23, Issue 2, 2021, Pages 110-121]
  • Nafey, Ahmed Simulation of Multi-Stage Flash with Brine Circulating Desalination Plant [Volume 21, Issue 1, 2019, Pages 34-42]
  • Nasr El Din, Hisham Visco-Elastic Surfactant Improves Sweep Efficiency and Interfacial Tension in Chemical Flooding [Volume 18, Issue 1, 2016, Pages 67-71]
  • Nasr El Din, Hisham Understanding of Visco-Elastic Surfactant and Acid Stimulation Application [Volume 17, Issue 1, 2015, Pages 54-58]
  • Nassar, Eman Electrical and Thermal Conductivity Performance of epoxy/SiC composite prepared by a modified apparatus [Volume 23, Issue 2, 2021, Pages 42-48]
  • Ng, Denny Analysis Study for the Benefits of Heavy Crude Oil Hydrotreating before Distillation [Volume 23, Issue 2, 2021, Pages 81-91]
  • Nyein, Chaw Prediction of Porosity and Water Saturation Using Neural Networks in Shaly Sand Reservoirs, Western Deseret, Egypt [Volume 22, Issue 2, 2020, Pages 80-91]

O

  • Ogolo, Naomi Amoni Water Compatibility Study: Detecting Souring Potential [Volume 24, Issue 1, 2022, Pages 1-4]
  • Omara, M Recent Developments of Solar Stills and Humidification De-humidification Desalination Systems: A Review [Volume 23, Issue 2, 2021, Pages 57-69]
  • Onyekonwu, Mike O. Water Compatibility Study: Detecting Souring Potential [Volume 24, Issue 1, 2022, Pages 1-4]
  • Osman, Walaa Analysis Study for the Benefits of Heavy Crude Oil Hydrotreating before Distillation [Volume 23, Issue 2, 2021, Pages 81-91]
  • Osman, Walaa Industrial Application of Plant Crude Oil through Comparison of Heat Exchanger Network Synthesis Techniques [Volume 23, Issue 2, 2021, Pages 49-56]
  • Othman, Mohamed An Optimum Limited Entry for Multiple Zone Stimulation by Hydraulic Fracturing [Volume 18, Issue 1, 2016, Pages 84-93]
  • Otokpa, Martins Water Compatibility Study: Detecting Souring Potential [Volume 24, Issue 1, 2022, Pages 1-4]

P

R

  • Ramadan, Rashad Effect of Nb Addition on the Hot Deformation Behavior and Microstructure of Low Carbon Steel [Volume 20, Issue 1, 2018, Pages 66-72]
  • Ramadan, Rashad Processing and Evaluation of Ferritic-Bainitic Multi-phase Steel [Volume 19, Issue 1, 2017, Pages 71-80]
  • Rashed, Gamal Influence of ZrO2 Particles on the Tribological Properties of AlMg5 Alloy [Volume 23, Issue 1, 2021, Pages 95-103]
  • Raslan, Samir Thermal maturity and hydrocarbon generation modelling for the Lower Rudeis source rock and petroleum system analysis in Garra area, Gulf of Suez Rift, Egypt [Volume 23, Issue 1, 2021, Pages 65-81]
  • Reda, M. A Statistical Model for Hole Cleaning and Cuttings Transport Efficiency During Drilling of Wells [Volume 20, Issue 1, 2018, Pages 30-40]
  • Reda, Reham Heat Treatment of Low Cost Beta Titanium Alloy Produced by Investment Casting [Volume 22, Issue 1, 2020, Pages 35-41]
  • Refaee, Ahmed Effect of Dual Phase Steel Processing Conditions on the Microstructure and Mechanical Properties [Volume 18, Issue 1, 2016, Pages 20-26]

S

  • Sadawy, Mosaad Influence of ZrO2 Particles on the Tribological Properties of AlMg5 Alloy [Volume 23, Issue 1, 2021, Pages 95-103]
  • Sadawy, Mosaad Mohamed Time effect of graphene coating in between metallic layers of Copper-Nickel on corrosion behavior for carbon steel in saline water [Volume 23, Issue 2, 2021, Pages 70-80]
  • Safa, Mohamed Processing and Evaluation of Ferritic-Bainitic Multi-phase Steel [Volume 19, Issue 1, 2017, Pages 71-80]
  • Said, Ahmed Analysis of the Petroleum System Elements of the Amana Oil Field, East Abu Gharadig Basin, Western Desert, Egypt [Volume 24, Issue 1, 2022, Pages 28-41]
  • Said, W. B. Studying Techniques of Gas Emission Reduction [Volume 17, Issue 1, 2015, Pages 80-85]
  • Sakka, Ahmed Prediction of Porosity and Water Saturation Using Neural Networks in Shaly Sand Reservoirs, Western Deseret, Egypt [Volume 22, Issue 2, 2020, Pages 80-91]
  • Salah, Ahmed Modification of Relative Permeability Curves by ultrasonic Applications [Volume 21, Issue 1, 2019, Pages 82-89]
  • Salama, Asem Mostafa Evaluation of Physical and Geomechanical characteristics at a Steel Rolling Factory at Ataqa industrial zone, Suez, Egypt using Seismic Methods [Volume 23, Issue 1, 2021, Pages 31-43]
  • Salama, Tarek GEOTECHNICAL EVALUATION OF SOIL AT EL-ALAMEIN NEW CITY, NORTHERN COAST, EGYPT [Volume 22, Issue 1, 2020, Pages 26-34]
  • Salem, Adel Mohamed Modification of Relative Permeability Curves by ultrasonic Applications [Volume 21, Issue 1, 2019, Pages 82-89]
  • Salem, Adel Determination of Average Reservoir Pressure using Pressure buildup Test: Analytical and Simulation Approach for Egyptian Oil Fields [Volume 21, Issue 1, 2019, Pages 9-16]
  • Salem, Adel Drill bits optimization using offset wells analysis and ROP modelling [Volume 23, Issue 1, 2021, Pages 1-5]
  • Salem, Adel Gravel Packing Sand Control Technique, Case Study, Belayim field, Gulf of Suez, Egypt [Volume 23, Issue 1, 2021, Pages 82-88]
  • Salem, Adel Mohamed Adjusting Relative Permeability Measurements to History Match Water Production in Dynamic Simulation Models [Volume 24, Issue 1, 2022, Pages 72-80]
  • Salem, Mostafa Electrical and Thermal Conductivity Performance of epoxy/SiC composite prepared by a modified apparatus [Volume 23, Issue 2, 2021, Pages 42-48]
  • Saliem, Mohammed S. M. Process simulation and performance improving of a gas plant in operation [Volume 17, Issue 1, 2015, Pages 17-28]
  • Saliem, Mohammed S. M. Process Simulation and Performance Improving of An Existing Ngl Plant [Volume 17, Issue 1, 2015, Pages 86-94]
  • Salih, Omar A.N. Oil Reserves Evaluation and Field Development plan of Hakim Oil Field in Libya [Volume 18, Issue 1, 2016, Pages 39-53]
  • Sameah, S. Characterization of Calcium Carbonate Rocks, East El Minya Deposits for Possibility Uses as Industrial Raw Materials [Volume 19, Issue 1, 2017, Pages 81-89]
  • Samir, Ahmed Gravel Packing Sand Control Technique, Case Study, Belayim field, Gulf of Suez, Egypt [Volume 23, Issue 1, 2021, Pages 82-88]
  • Sánchez, Elías Method Adaptation for Antiscaling Products Efficiency Measurement [Volume 23, Issue 2, 2021, Pages 24-34]
  • Seifelnassr, Ahmed Grindability of Quartz under Compressive and Impact Forces [Volume 22, Issue 2, 2020, Pages 51-57]
  • Seifelnassr, Ahmed Comparative Studies on the Grindability of Some Ore Minerals [Volume 24, Issue 1, 2022, Pages 66-71]
  • Seleman, Mohamed M. El-Sayed An Analytical Model of Heat Generation for Friction Stir Welding Using Bobbin Tool Design [Volume 20, Issue 1, 2018, Pages 1-5]
  • Seleman, Mohamed M. ELSayed Effect of Number of Friction Stir Processing Passes on Mechanical Properties of SiO2/5083Al Metal Matrix Nano-Composite [Volume 19, Issue 1, 2017, Pages 10-17]
  • Seleman, Mohamed M. El-Sayed Production and Characterization of AA7075-Graphite Composite Using Friction Stir Processing [Volume 20, Issue 1, 2018, Pages 101-110]
  • Seleym, Ashraf Minimizing Losses on Distribution System by PV and Compensating Capacitors [Volume 22, Issue 1, 2020, Pages 53-60]
  • Shaban, Ahmed Effect of Heat Input and Shielding Gas on the Performance of 316 Stainless Steel Gas Tungsten Arc Welding [Volume 22, Issue 1, 2020, Pages 9-15]
  • Shahin, Mohamed Effect of HYL Process Parameters on the Quality of Iron Ore Reduction [Volume 18, Issue 1, 2016, Pages 54-60]
  • Shalaby, S. E. A Statistical Model for Hole Cleaning and Cuttings Transport Efficiency During Drilling of Wells [Volume 20, Issue 1, 2018, Pages 30-40]
  • Shalaby, Shouhdi Drill bits optimization using offset wells analysis and ROP modelling [Volume 23, Issue 1, 2021, Pages 1-5]
  • Sharshir, Swellam W Recent Developments of Solar Stills and Humidification De-humidification Desalination Systems: A Review [Volume 23, Issue 2, 2021, Pages 57-69]
  • Shearman, John A Survey of Contractors Permitted to Excavate on Historic Sites in Egypt [Volume 22, Issue 2, 2020, Pages 9-16]
  • Shehata, Walaa Optimum operating conditions for existing natural gas compression station [Volume 18, Issue 1, 2016, Pages 11-19]
  • Shehata, Walaa M. Simulation and Optimization Analysis of Natural Gas Liquid (NLG) Recovery Process from Natural Gas [Volume 19, Issue 1, 2017, Pages 90-102]
  • Shehata, Walaa M. Hydrogen Distribution Network of Medor Refinery Plant by Using Two Different Optimization Techniques [Volume 17, Issue 1, 2015, Pages 66-72]
  • Shehata, Walaa Mixed Refrigeration Process for Improving NGL Recovery of El-Wastani Gas Plant [Volume 21, Issue 1, 2019, Pages 56-71]
  • Shehata, Walaa A superstructure model for indirect inter-plant water integration for selecting the optimum single-pass and partitioning regenerators [Volume 22, Issue 2, 2020, Pages 1-8]
  • Shoaib, Abeer Safe Storage Design For Naturally Occurring Radioactive Material Waste Using Human Intrusion Scenario [Volume 19, Issue 1, 2017, Pages 1-9]
  • Shoaib, Abeer M. Hydrogen Distribution Network of Medor Refinery Plant by Using Two Different Optimization Techniques [Volume 17, Issue 1, 2015, Pages 66-72]
  • Shoaib, Abeer A Study on Catalyst Entrainment from the Ethylene Oxychlorination Fluidized Bed Reactor [Volume 23, Issue 1, 2021, Pages 12-16]
  • Shoaib, Abeer Analysis Study for the Benefits of Heavy Crude Oil Hydrotreating before Distillation [Volume 23, Issue 2, 2021, Pages 81-91]
  • Shoaib, Abeer Industrial Application of Plant Crude Oil through Comparison of Heat Exchanger Network Synthesis Techniques [Volume 23, Issue 2, 2021, Pages 49-56]
  • Snosy, Mohamed Modification of Relative Permeability Curves by ultrasonic Applications [Volume 21, Issue 1, 2019, Pages 82-89]
  • Soliman, Ahmed Development of new models for predicting crude oil bubble point pressure, oil formation volume factor, and solution gas-oil ratio using genetic algorithm [Volume 22, Issue 2, 2020, Pages 17-39]
  • Soliman, Farouk A. Geological Evolution of Sukari Gold Mines Area- Eastern Desert, Egypt [Volume 17, Issue 1, 2015, Pages 29-38]
  • Swief, Rania Implementing NI Environment for A Remotely Accessed Photovoltaic Module Characterizer. [Volume 22, Issue 1, 2020, Pages 42-46]
  • Swief, Rania Minimizing Losses on Distribution System by PV and Compensating Capacitors [Volume 22, Issue 1, 2020, Pages 53-60]

T

  • Tantawy, Mahmoud A Oil Reserves Evaluation and Field Development plan of Hakim Oil Field in Libya [Volume 18, Issue 1, 2016, Pages 39-53]
  • Tantawy, Mahmoud A. Reservoir Pressure Determination Using “After Hydraulic Fracturing Closure Analysis” technique [Volume 17, Issue 1, 2015, Pages 1-16]
  • Tantawy, Mahmoud Reservoir Pressure Determination Using “After Hydraulic Fracturing Closure Analysis” technique [Volume 21, Issue 1, 2019, Pages 43-55]
  • Tantawy, Mahmoud Abdo Modern Decline Curve Analysis of Unconventional Reservoirs: A Comparative Study Using Actual Data [Volume 24, Issue 1, 2022, Pages 51-65]

U

  • Ugwu, Pascal Ogonna Water Compatibility Study: Detecting Souring Potential [Volume 24, Issue 1, 2022, Pages 1-4]
  • Ukut, Imo Water Compatibility Study: Detecting Souring Potential [Volume 24, Issue 1, 2022, Pages 1-4]

V

W

  • Wahba, Ali M. A Study on Gas Compressibility Factor for Gas-Condensate Systems [Volume 20, Issue 1, 2018, Pages 41-57]
  • Wahba, Ali Moustafa Modern Decline Curve Analysis of Unconventional Reservoirs: A Comparative Study Using Actual Data [Volume 24, Issue 1, 2022, Pages 51-65]

Y

  • Yasin, Ahmed Drill bits optimization using offset wells analysis and ROP modelling [Volume 23, Issue 1, 2021, Pages 1-5]
  • Yehia, Hossam M. Effect of Graphene Nano-Sheets Additions on the Microstructure and Wear Behavior of Copper Matrix Nano-Composite [Volume 20, Issue 1, 2018, Pages 124-130]
  • Yehia, Hossam M. Fabrication of Aluminum Matrix Nanocomposites by Hot Compaction [Volume 22, Issue 1, 2020, Pages 16-20]
  • Yehya, Hossam EFFECT OF Al2O3 COATED Cu NANOPARTICLES ON PROPERTIES OF Al / Al2O3 COMPOSITES [Volume 22, Issue 1, 2020, Pages 1-8]
  • Youssif, Khalid Thermal Analysis of The Baking and Start-up Stages For Hall–Heroult Cells at Egyptalum Smelter [Volume 22, Issue 2, 2020, Pages 100-109]

Z

  • Zaghloul, Abdelhady Influence of Design Parameters Change on Mass Transfer and Productivity in A Tubular Solar Still [Volume 21, Issue 1, 2019, Pages 27-33]
  • Zakaria, Ahmed Challenges of the Seismic Image Resolution for Gas Exploration in the East Mediterranean Sea [Volume 23, Issue 2, 2021, Pages 13-23]
  • Zakaria, Ahmed Kamel Adjusting Relative Permeability Measurements to History Match Water Production in Dynamic Simulation Models [Volume 24, Issue 1, 2022, Pages 72-80]
  • Zamora, Lixfe Method Adaptation for Antiscaling Products Efficiency Measurement [Volume 23, Issue 2, 2021, Pages 24-34]
  • Zayed, Ahmed Evaluation of INS Performance in Mine Mapping [Volume 18, Issue 1, 2016, Pages 61-66]